Automatic ac electric engine sales made in China – replacement parts – in Matsuyama Japan High Speed Die Cutting and Creasing Machine with top quality

We – EPG Team the biggest worm gearbox, couplings and gears factory in China with 5 diverse branches. For much more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Specs:

 
 Attributes of the device:
Main Attributes:
The Bobst kind reduce structure makes the cutting platform motion like a scissor, it will comprehend a total and easier cut.
Main worm equipment makes use of alloy copper substance, right after the seasoned operator’s handbook scraping treatment and rigorous common tests, it can assures the driving elements 10 many years daily life.
The principal chains undertake imported British Renold brand, the distinctions of 10 chains are less than .2mm.
The join amongst equipment box and driving shaft adopts sleeve and pin construction making sure a sturdy connection.
Pace:  
The device adopts frequency controller to obtain stepless speed acceleration which can get to to 4500 instances per hour. For the duration of genuine creation, it can normally operate at 3800 to 4000 occasions per hour in accordance to the good quality of the board. If the good quality of the paper is excellent, a great operator even can function the machine at 4200 instances for every hours with out sensation also challenging.
Basic safety: 
As it is demonstrated in the picture of the machine, the machine adopts rear part paper feeding method which keeps the operator absent from the die-cutting portion. The mounting and adjustment of the die plate is also carried out outside the house of the die-cutting portion with sensors and detectors at die-reducing portion to make sure that the machine can not be started when the die-chopping plate is at adjustment standing.
 
In addition to the sensors at die-cutting element, there are sensor or approach switches at window component to make the complete equipment at monitoring position to make certain its protection.
 
Operation comfort:
 

There is Guy-device interface set up in the control panel which will exhibits the basic safety position of the machine as effectively as malfunctions to aid the operator. Digicam is also set up in front of the operator for him/her to keep track of the procedure status at the shipping and delivery element.
 
Primary Buildings and Key Content Utilised
 
4 Principal Huge Components:
They are referring to: bottom station, relocating system, higher system and device wall. The bottom station is produced of grey forged iron -HT two hundred the moving platform is ductile iron – QT forty two-10 and the device wall is high quality A3 metal.
Principal Travel:
 

The eleven KW Siemens Motor together with the pneumatic clutch, worm shaft and worm equipment forms a moving set to make sure secure pressure out place of not less than 300 tons.
 
The materials for the worm shaft is 40Cr with quenching treatment and gear hardness HRC forty five-fifty. the material for the worm is copper alloy – ZQAL9-4.
 
The bearing that is employed is SKF. The bush is copper alloy ZQSn6-6-3.
 
Die-reducing and Creasing Component:
 
The generate is transferred through crank rod to pendulum which will bring the transferring system to go up and down to achieve die-cut and creasing function.
 
The pendulum is manufactured of higher good quality ductile iron. The pendulum axis is carried out by induction harden with surface area hardness HRC forty three-forty eight. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely comply with the specification of 1080 sort automatic die-cutting and creasing equipment. In contrast with automatic die-reducing and creasing machine which is utilised for cardboard die-chopping, this type of semi-automatic die-reducing and creasing equipment is mostly employed for corrugated board which requirements significantly less strain for die-cutting, in this case very some producers have made more compact width on the pendulum and smaller sized diameter on the pendulum shaft. We hold wider pendulum and even bigger diameter on its shaft to make our equipment very last for a more time daily life.
 
The die-chopping plate employs 7 mm 75 Crl plate which has far more hardness and life span than the manganese plate.  
 
Board Conveying:
 

It adopts 3-cam intermittent positioning device to make certain the boarding conveying exact and secure.
The machine employs gripper bar sort with 12A extended joints chain which is significantly less in bodyweight and considerably less shock to the intermittent device below the precondition to ensure the toughness of the chain. The brand name of the chain is Renold U.K with large precise and good quality. .    
 
The Gripper bar adopts aviation aluminum with three bridge sort- light-weight in fat and substantial in energy.
Electric powered Portion
The electrical components are created and assembled according to the European CE common and utilizes planet extensive identified model products.
 
Set up of Die
The die mounting and dismounting adopts aspect withdrawing methods which time saving and straightforward for operation.
There are two techniques for the fixation of the die-both by bolt or clippers which are subject to customer’s tips.
 
The chase loc ept is pneumatic which is straightforward, convenient and dependable.
 
Specific Figures of Our Machine:
 
Clever And Particular Entrance Lay Style:
 
In comparison with the card board sheet, the corrugated board has far more strength. If the corrugated board abnormally reaches to the front lay, it will damage the entrance lay and the gripper bar when the front lay reaches to its highest position.
 
Typically the producers will put in sensors on this part to stop the equipment when the paper is fed abnormally to the front lay. Even so, when the machine is running at the high speed, the inertia will bring the machine to operate for a while to make the front lay to its highest position and then also injury the entrance lay and the gripper bar.
 
Our special style is that when the abnormal board feeding happens and becoming detected, the entrance lay can never ever reaches to its maximum stage which tends to make free from front lay and gripper bar damages due to the fact of abnormal paper feeding.
 
As it is our particular design, so there is no photograph to be demonstrated below.
Optional Shipping System:
 
According to the requirement of the consumer we can do the shipping and delivery platform both square kind or E variety (as revealed in the image) . If the customer has enough pallets, he can decide on square kind. If the customer does have enough pallet, he can select, E sort platform for which will also offer 4 supply troll
Pneumatic Pre-loading and Lifting Phase
The pre-loading device is pneumatic driven. When a single paper measurement is set, when you do other pile of pre-loading, there is no hassle of you to reset the pre-loading system, you can just press the button and the machine will do for you.
 
The lifting step unit is also pneumatic to facilitate the conveying of the paper pile.
Dancing Roller Feeding:
 
Quite some of the die-slicing equipment producers use immediate feeding method which is the operator will feed the board immediately to the mouth of the gripper. What we have found that the feeding time to the gripper is only .3 seconds which makes the board feeding work hard and inaccurate.
 
Our machine utilizes an added dance roller feeding program whose board feeding time can be lengthen to .6 second. Together with the conveying components it makes an less complicated operate of the operator and more rapidly in performance of the device.
 
For case in point:  If an operator operates the immediate feeding semi-automatic die-cutting equipment at 3300 sheets per hour, he can easily operate our device at 3700 – 4000 sheets per hour.
 
Conveying Part:
The board gained by the dance roller will go by means of a conveying portion with belt conveying and belt urgent which makes the board currently being pressed prior to reaching to the front lay.
Ahead of the board reaches to the entrance lay, he will be repositioned by the side lay.
By these techniques, the board conveyed by the dance roller will be far more correct and stable when they reach to the gripper bar.
 
There is also detector to detect the position of the board. If board does not come to the front lay at typical placement, the detector will ship alerts to cease the machine.
None-end Feeding and Delivery
This type of equipment has our patented program – non-end feeding and supply functions which can decrease the wor ept tension of the operator and improve the wor ept efficiency of the equipment
 
Underneath this program, the pre-piling is at the aspect of the operator. The pre-piled board can be transported beneath the main pile when the major pile is detected short of paper.
At the delivery component, when the board is reduce to be about 1 meter, the machine will push the die-lower board pile out of the machine delivery component so that it is simple for the operator to draw them to the specified location without the need to have of stopping the machine.  
 
Configurations:
 

 
Instruments Kit

/ The use of authentic tools manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our company and the outlined substitution parts contained herein are not sponsored, authorized, or produced by the OEM. /